Hi James, Sadly, the input port of the Xbox One is only an Input. Unless you are a master in coding and can get the board to send out the graphics signal to that input, there is not a way that I know of to get it to send signal rather than receive. Best Regards, Drew.

Hi Richard, I'm not sure the exact reason you would want your CEL on, but nevertheless. You will have to disassemble the driver's side of the dashboard to get to the gauge cluster. You will need to pull that out and find the bulb that correlates with the CEL. If you turn your Accord to "On" without starting it, the rest of the engine lights should light up momentarily. If none of them turn on, then I would look into a new cluster for replacement. If they turn on but the CEL does not, I would see if it is possible to replace the bulb for that. Best of Luck, Drew.

Hi Bradley, To me it does sound like you have a damaged spot on the sensor. Zooming in on a phone camera is typically just a digital zoom since the camera itself does not have the mechanisms to move the lens in and out, this would be why it disappears when you zoom because it is essentially cropping out that spot. On my old LG G4, it was just a case of removing the back of the phone, and undoing the screws that help the camera assembly in place. I am not sure if that is the same process on your particular device. That was just the case for me. Best of Luck, Drew.

Hi Shri, If the power shut off at your house, it is possible that there was a power spike and it may have fried the power supply on your TV. I would schedule an appointment with a maintenance person or check your manual for information regarding the blinking red light. Best of Luck, Drew.

Hi kok wee ng, It sounds like either your graphics processor in your TV is going bad, or the LCD is starting to break inside and not display images correctly. I would try messing around with some video settings on your TV to see if the various lines get stronger or lighter with adjusting the color, contrast, etc. If you adjust your brightness to full and the lines are as bright as the rest of the TV, then the graphics board is going out. If you adjust it to minimum and the lines are still there, the LCD is most likely going out. Best Regards, Drew.

Hi Facundo, To me it sounds like your backlight went out on your Macbook. I would look into a possible replacement, but before you order another one. I would check into seeing if it just came unplugged or the cable for it went bad. That way you do not waste your money on another screen if that was not the problem. Best Regards, Drew.

Hi David, If the projector is just displaying a black screen, it's possible that your tablet simply doesn't have enough processing and graphics power to send the display over to your projector. I would check to see if your tablet at least has Android 4.4.2 on it. Google states that's the oldest version that will be able to cast its screen. Try connecting it to another source, such as a TV or an old monitor with VGA connectors. If those work and the projector does not, then it could be something with the projector that needs set or isn't compatible with the tablet. Best of Luck, Drew.

Hi Recardo, Based on what you've explained, to me it sounds like you may have a worn-out spark plug, ignition wires, or a vacuum leak somewhere in your vehicle. I would inspect cylinder #4's spark plug and wiring for any physical damage. Try a replacement spark plug to see if that fixes the problem. If not, I would recommend taking it to your mechanic for further investigation. Best of Luck, Drew.

Hi Daniel, It is possible that your SIM card is going out. Considering you can still continue to Bluetooth and connect to WiFi. I would ask for a replacement SIM or find another SIM card that's activated. If it continues to do the same thing, then I would look into a new antenna. Best Regards, Drew.

Hi William, Attached below is the firing order of your Caliber. This is for the 2.0L. Hopefully this helps you. Best Regards, Drew https://workshop-manuals.com/dodge/caliber/l4-2.0l_vin_b/powertrain_management/ignitio...