Ga door naar hoofdinhoud

iPod 第2世代のディスプレイの交換

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden de handleiding die deze stap bevat.

Stap 3
iPod 2nd Generation Display Replacement: stap 0, afbeelding 1 van 1
  • Like the hard drive connector, for the following step, you only need to move the connector about 2 mm. Pushing too hard or too far will damage the connector.

  • Loosen the touch wheel connector by pulling the brown locking bar toward the side of the iPod using the tips of your fingers.

ハードドライブコネクタと同じように、次の手順では、コネクタを約2mmのみ動かしてください。力強く、あるいは奥深くに押し込むとコネクタにダメージを与えることがあります。

指先を使って、iPod側に向けてブラウンのロッキングバーを引っ張って、タッチホイールコネクタを緩めます。

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.