Hi, i replaced broken screen and battery in iPhone 5s but after that, phone is discharging really fast. I noticed, that it...

Hi Sagibro! The easiest and the cheapest way to unlock simlock is to carry it to phone service. Problem is because simlock - phone operator blocks phone from using sim card from other operators.

Hi Mike! I think that problem is with limescale depositing on the pipe walls - especially if you have hard water. For 5 years it’s possible that limescale stucked in pipes in refrigerator. Try to get to pipes and clean them.

Hi Konul! First at all try the steps below: (1) Get a new Ethernet cable and try again with it, (2) Upgrade network card drivers, (3) Clean up Ethernet port with an ear stick soaked in isoproponal alcohol If this actions won’t help, it’s possible that Ethernet port is damaged.

Hi Colin! First at all do the following steps: (1) Thoroughly (but carefully) clean all connectors, (2) Make sure that all connectors (on the motherboard side and on screen flex side) aren’t broken or crooked (3) Make sure that you plugged connectors correct (as in Screen replacement guide) Did you connected screen or battery as first? If that steps won’t help, in 90% your new screen is damaged. Try to contact with customer support.

First, you have to check if there is 5V on your board (somewhere near to USB-port). If there is no voltage, you should replace micro-usb port. If there is voltage, try to clean all board with IPA.

Probably there is short circuit on fire button. Try to replace that microswitch.