/
DE
Deutsch
ES
Español
IT
Italiano
PT
Português
TR
Türkçe
JP
日本語
EN
English
FR
Français
NL
Nederlands
RU
Pусский
ZH
中文
KO
한국어
Lid worden
Inloggen

iMac 27寸（2009年下半年至2010年款）显卡更换

Vorige stap

Stap 8 vertalen

Terug naar de handleiding
Engels
Chinees
Stap 8
iMac Intel 27" (Late 2009 or Mid 2010) Graphics Card Replacement: stap 0, afbeelding 1 van 1

  • Reassemble the LCD display as explained on iFixit.

  • No other work needs to be done. As you removed the power cable the SMC should reset, which is the chip configuring your hardware.

  • If all goes well, you should be greeted with a welcome screen and "About This Mac" should show the image to the left.

  • Note: I also replaced the optical drive with a 256GB SSD, which can be done easily during the installation process.

  • Last tip: If you remove the optical drive for an SSD, make a minimal bootcamp partition and install Windows on it. It will save you a lot of trouble if you ever need one. Believe me, simply do it. Installing bootcamp with no optical drive is a pain.

按照ifixit指南操作重新安装LCD屏幕。

不需要再进行任何操作了。 当您卸下电源时，SMC应该重置。 配置硬件芯片

如果一切顺利，您应该看到欢迎界面，然后在关于本mac中应该和左图显示一致。

注意： 我将DVD驱动器替换成了256gb 的固态硬盘，这个也很容易安装。

最后的提示： 如果您想移走DVD驱动器来安装固态硬盘创建一个最小的bootcamp分区安装windows。 这个会为您避免很多的麻烦。 相信我，在没有DVD安装bootcamp会很痛苦。

-[* black] Reassemble the LCD display as explained on ifixit.
-[* black] No other work needs to be done. As you removed the power cable the SMC should reset, which is the chip configuring your hardware
-[* black] If all goes well you should be greeted with a welcome screen and "about this mac" should show the image to the left
-[* black] Note: I also replaced the DvD drive with a 256GB SSD which can be done easily during the installation process
-[* black] Last tip: if you remove the DvD drive for a SSD make a minimal bootcamp partition and install windows on it. It will save you a lot of trouble if you ever need one. Believe me, simply do it, installing bootcamp with no DvD drive is a pain.
+[* black] Reassemble the LCD display as explained on iFixit.
+[* black] No other work needs to be done. As you removed the power cable the SMC should reset, which is the chip configuring your hardware.
+[* black] If all goes well, you should be greeted with a welcome screen and "About This Mac" should show the image to the left.
+[* black] Note: I also replaced the optical drive with a 256GB SSD, which can be done easily during the installation process.
+[* black] Last tip: If you remove the optical drive for an SSD, make a minimal bootcamp partition and install Windows on it. It will save you a lot of trouble if you ever need one. Believe me, simply do it. Installing bootcamp with no optical drive is a pain.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.