Ga door naar hoofdinhoud

MacBook Pro 15" Unibody Late 2008/Early 2009 ハードドライブの交換

Stap 1 vertalen

Stap 1
MacBook Pro 15" Unibody Late 2008 and Early 2009 Hard Drive Replacement: stap 0, afbeelding 1 van 1
  • Remove two T6 Torx screws from each side of the hard drive (four screws total).

  • You'll need to transfer these screws to your new hard drive if you're changing drives.

  • If you are installing a new hard drive, we have an OS X install guide to get you up and running.

ハードドライブの両側からT6トルクスネジを2本ずつ(合計4本)を外します。

ドライブを交換する場合は、これらのネジを新しいハードドライブに移す必要があります。

新しいハードドライブをインストールする場合、OS Xのインストールガイドを参照してください。

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.