Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 17 handleidingen die deze stap bevatten.
Stap 2 vertalen
Stap 2
Display
-
Carefully lay the iMac stand-side down on a flat surface.
-
Use a thin hooked tool to lift one side of the top edge of the display by its steel outer frame.
-
Raise and hold the display high enough to access the cables.
| + | [title] Display |
|---|---|
| [* black] Carefully lay the iMac stand-side down on a flat surface. | |
| - | [* icon_note] Due to tight tolerances, you will have to use a thin hooked tool to lift the display out of the outer case. As seen in the first picture, we made one out of a bent paperclip. |
| - | [* icon_note] Alternatively, our [product|IF174-002|Dual Hard Drive Kit] includes a pair of tweezers with an angled tip that are great for this task. |
| + | [* icon_note] Due to tight tolerances, you will have to use a thin hooked tool to lift the display out of the outer case. As seen in the first picture, we made one out of a bent paperclip. A pair of [product|IF145-020-5|angled tweezers] can also work well. |
| [* black] Use a thin hooked tool to lift one side of the top edge of the display by its steel outer frame. | |
| [* icon_note] After lifting the top edge of the display on one side, hold it out of the outer case while you use a hooked tool to lift the other side. | |
| [* black] Raise and hold the display high enough to access the cables. | |
| [* icon_caution] Do not lift the top edge of the display out of the outer case too far, as several short ribbon cables still connect the two components. |
Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.