/
DE
Deutsch
ES
Español
IT
Italiano
PT
Português
TR
Türkçe
JP
日本語
EN
English
FR
Français
NL
Nederlands
RU
Pусский
ZH
中文
KO
한국어
Lid worden
Inloggen

Come saldare e dissaldare componenti elettrici

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden de handleiding die deze stap bevat.

Terug naar de handleiding
Engels
Italiaans
Stap 13
How To Solder and Desolder Connections, Through-hole soldering tips and tricks: stap 0, afbeelding 1 van 3 How To Solder and Desolder Connections, Through-hole soldering tips and tricks: stap 0, afbeelding 2 van 3 How To Solder and Desolder Connections, Through-hole soldering tips and tricks: stap 0, afbeelding 3 van 3
Through-hole soldering tips and tricks

  • If you're soldering a component with multiple through-hole leads (such as a joystick module, microcontroller, or port), solder two opposite leads to hold the component position in place. Check the alignment, then solder the remaining joints.

  • Alternatively, you can bend two opposite leads to secure the component to the board while you solder.

  • If the molten solder doesn't flow or is hard to manipulate, apply more flux to the joint.

Consigli e trucchi per la saldatura a foro passante

Se stai saldando un componente con più terminali a foro passante (come un modulo joystick, un microcontrollore o una porta), salda due terminali opposti per tenere il componente in posizione. Controlla l'allineamento, poi salda i restanti terminali.

In alternativa, puoi piegare due terminali opposti per fissare il componente alla scheda mentre saldi.

Se lo stagno fuso non scorre o è difficile da maneggiare, applica più flussante sulla saldatura.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.