Ga door naar hoofdinhoud

Cómo soldar y desoldar conexiones

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 2 handleidingen die deze stap bevatten.

Stap 30 vertalen

Stap 30
How To Solder and Desolder Connections, Surface mount tips and tricks: stap 0, afbeelding 1 van 2 How To Solder and Desolder Connections, Surface mount tips and tricks: stap 0, afbeelding 2 van 2
Surface mount tips and tricks
  • Many surface mount components (especially integrated circuits) have multiple leads that need to be soldered. They can be difficult to align and secure to the board:

  • Hold the component in place and solder the corner leads to secure it in place.

  • Alternatively, you can secure the component to the board using polyimide tape and then solder the corner leads.

Muchos componentes de montaje superficial (sobre todo los circuitos integrados) tienen varios cables que hay que soldar. Puede resultar difícil alinearlos y fijarlos a la placa:

Sujeta el componente en su sitio y suelda los cables de las esquinas para fijarlo.

Como alternativa, puedes fijar el componente a la placa utilizando cinta de poliamida y soldar después los terminales de las esquinas.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.