Ga door naar hoofdinhoud

Come saldare e dissaldare componenti elettrici

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden de handleiding die deze stap bevat.

Stap 16
How To Solder and Desolder Connections: stap 0, afbeelding 1 van 3 How To Solder and Desolder Connections: stap 0, afbeelding 2 van 3 How To Solder and Desolder Connections: stap 0, afbeelding 3 van 3
  • Clean the tip of your soldering iron. If you're using a sponge, wet the sponge and quickly wipe the tip across it. If you're using brass wire, stab the tip into the wire a few times.

  • Melt a small glob of solder onto the tip. This will help with heat transfer.

  • If you're desoldering with a solder wick, proceed to the next step.

  • If you're desoldering with a desoldering pump, skip to this step.

Pulisci la punta del tuo saldatore. Se stai usando una spugna, bagna la spugna e passa rapidamente la punta sulla superficie. Se stai usando un filo di ottone, infilza la punta nel filo alcune volte.

Sciogli una piccola quantità di stagno sulla punta. Questo aiuterà il trasferimento di calore.

Se stai dissaldando con una treccia dissaldante, procedi al passo successivo.

Se stai dissaldando con una pompa dissaldante, salta a questo passo.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.