Ga door naar hoofdinhoud

iPod Classicのハードドライブの交換

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 8 handleidingen die deze stap bevatten.

Stap 24
iPod Classic Hard Drive Replacement: stap 0, afbeelding 1 van 1
  • Rotate the hard drive out of the framework and place it so that the connector is facing up.

  • Use a spudger to flip up the small black locking tab holding the orange hard drive ribbon in place. The tab will rotate up 90 degrees, releasing the ribbon cable.

フレームワークからハードドライブを回転させて外し、コネクタが上向きになるように置きます。

スパッジャーを使って、オレンジ色のハードドライブリボンを固定しているプラスチック製タブを跳ね上げます。リボンケーブルを解放しながら、タブを90度上向きに回転させます。

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.