Ga door naar hoofdinhoud
Engels
Nederlands
Stap 4
Remove four out of the six 5.3 mm T8 Torx screws securing the display to the upper case. Leave the innermost screws (one from each hinge) in place.
  • Remove four out of the six 5.3 mm T8 Torx screws securing the display to the upper case.

  • Leave the innermost screws (one from each hinge) in place.

  • When reassembling, be sure the two screws going back into the hinge on the left go back through the webcam/AirPort cable bracket.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.