/
DE
Deutsch
ES
Español
IT
Italiano
PT
Português
TR
Türkçe
JP
日本語
EN
English
FR
Français
NL
Nederlands
RU
Pусский
ZH
中文
KO
한국어
Lid worden
Inloggen

2011年上半年 MacBook Pro 13" 一体化机主板更换

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 19 handleidingen die deze stap bevatten.

Terug naar de handleiding
Engels
Chinees
Stap 2
MacBook Pro 13" Unibody Early 2011 Logic Board Replacement: stap 0, afbeelding 1 van 1

  • Disconnect the camera cable from the logic board.

  • The camera cable slides out from its logic board connector. If your cable feels fragile, use a spudger to walk the cable out from the metal tabs on each side of the connector head.

从主板断开摄像头电线。

把电线从主板上平行移开。如果仅仅网上拉可能会损坏主板电线。

[* black] Disconnect the camera cable from the logic board.
-[* icon_caution] Pull the cable parallel to the face of the logic board. Pulling the cable upward may damage the logic board or the cable itself.
+ [* icon_note] The camera cable slides out from its logic board connector. If your cable feels fragile, use a spudger to walk the cable out from the metal tabs on each side of the connector head.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.