Ga door naar hoofdinhoud

Remplacement de l'assemblage avant du Motorola Droid RAZR M

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 6 handleidingen die deze stap bevatten.

Stap 8 vertalen

Stap 8
Motorola Droid RAZR M Front Assembly Replacement: stap 0, afbeelding 1 van 3 Motorola Droid RAZR M Front Assembly Replacement: stap 0, afbeelding 2 van 3 Motorola Droid RAZR M Front Assembly Replacement: stap 0, afbeelding 3 van 3
  • Like a clamshell, slowly open the device from the top. Open the remainder of the device slowly while being mindful of the flat orange wire that connects the motherboard to the front assembly.

  • Undo the snap connection in the lower left corner by inserting the plastic opening tool under the end of the orange wire connected to the motherboard. Lift gently.

  • Once the snap connection is undone, pull apart the front assembly from the rest of the phone.

Comme un clapet, ouvrez lentement l'appareil par le haut. Ouvrez lentement le reste de l'appareil tout en faisant attention au fil plat orange qui relie la carte mère à l'ensemble avant.

Défaites la connexion rapide dans le coin inférieur gauche en insérant l'outil d'ouverture en plastique sous l'extrémité du fil orange connecté à la carte mère. Soulevez doucement.

Une fois la connexion par encliquetage défait, séparez l'ensemble avant du reste du téléphone.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.