Skip to main content

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 8 handleidingen die deze stap bevatten.

Stap 1 vertalen

Step 1
The iPod Touch 4th Generation front panel is attached to the rear case by adhesive. The use of a heat gun to soften the adhesive is highly recommended.
  • The iPod Touch 4th Generation front panel is attached to the rear case by adhesive. The use of a heat gun to soften the adhesive is highly recommended.

  • With the heat gun set on "low", begin heating the lower portion of the Touch near the home button.

  • It is suggested to heat the desired portion in a circular motion pattern to evenly dissipate the amount of heat throughout the device.

iPod Touch第4代前面板通过粘合剂连接在后壳上。 强烈建议使用热风枪软化粘合剂。

当热风枪温度调节在“低”位置时,开始加热触摸屏下部靠近主home键的位置。

建议以绕圈圈的方法加热所需的部分,以均匀地散发整个装置的热量。

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.