Ga door naar hoofdinhoud

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 8 handleidingen die deze stap bevatten.

Stap 2
Beware, as the Touch will be very hot. It may be helpful to hold it with a towel while prying. Insert the edge of an iPod opening tool between the front glass panel and the  plastic bezel near the home button.
  • Beware, as the Touch will be very hot. It may be helpful to hold it with a towel while prying.

  • Insert the edge of an iPod opening tool between the front glass panel and the plastic bezel near the home button.

  • Do not try to pry between the plastic bezel and the steel rear case.

  • Pry the bottom edge of the front panel upward, being careful not to bend the glass excessively.

  • If it is too difficult to pry up the front panel assembly, reheat it and try again.

当心,因为触摸将是非常热的。使用 时用毛巾拿着它可能会有帮助。

将撬棒的边缘插入前玻璃面板和靠近home键的塑料挡板之间。

不要试图在塑料表圈和钢制后盖之间撬动。

向上撬前面板的底部边缘,注意不要过度弯曲玻璃面板。

如果撬起前面板组件太困难,请重新加热并重试。

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.