Ga door naar hoofdinhoud

Sostituzione disco rigido Apple Time Capsule modello A1302

Stap 1 vertalen

Stap 1
Apple Time Capsule Model A1302 Hard Drive Replacement, Remove the hard drive: stap 0, afbeelding 1 van 3 Apple Time Capsule Model A1302 Hard Drive Replacement, Remove the hard drive: stap 0, afbeelding 2 van 3 Apple Time Capsule Model A1302 Hard Drive Replacement, Remove the hard drive: stap 0, afbeelding 3 van 3
Remove the hard drive
  • HDD is an abbreviation for "hard disk drive."

  • Before removing the HDD, remove the temperature sensor that is mounted directly on the hard drive. The sensor is attached to the hard drive using adhesive tape and a protective foam cushion.

  • Peel off the foam and set the sensor aside. Be gentle with the foam because you will reuse it to connect the sensor to the new HDD.

  • Lift the HDD out of the device and disconnect the two SATA cables from the HDD.

"HDD" è un abbreviazione per "disco rigido".

Prima di rimuovere l'HDD, rimuovi il sensore della temperatura montato direttamente sul disco. Il sensore è attaccato al disco con un nastro adesivo e un cuscino protettivo in schiuma.

Rimuovi la schiuma e metti da parte il sensore. Sii delicato con la schiuma poiché dovrai riusarla per riattaccare il sensore all'HDD.

Solleva l'HDD dal dispositivo e scollega i due cavi SATA dall'HDD.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.