Ga door naar hoofdinhoud

Reflowing solder joints on a TEAC GSA-5300 stereo integrated amplifier

Stap 1 vertalen

Stap 1
Reflowing solder joints on a TEAC GSA-5300 stereo integrated amplifier: stap 0, afbeelding 1 van 2 Reflowing solder joints on a TEAC GSA-5300 stereo integrated amplifier: stap 0, afbeelding 2 van 2
  • I used 1000v insulated electricians screwdrivers, as I like to be safe when working on electronics that have a higher risk of zapping me.

  • Amplifiers can have a high current stored in the large internal capacitors. Even with the insulated screwdrivers, please be sensible and ensure the amplifier is unplugged and try to leave it without power for a day or so. Also, read up on working with capacitors before you start work.

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.