/
Mijn werkbank

Krijg snel toegang tot handleidingen, onderdelen en antwoorden voor jouw apparaten

DE
Deutsch
ES
Español
IT
Italiano
PT
Português
TR
Türkçe
JP
日本語
EN
English
FR
Français
NL
Nederlands
RU
Pусский
ZH
中文
KO
한국어
Lid worden
Inloggen

如何修理Apple AC Adapter（电源适配器）的破损的电源线

Terug naar de handleiding
Engels
Chinees
Stap 11
How to Repair an Apple AC Adapter Broken Cable: stap 0, afbeelding 1 van 3 How to Repair an Apple AC Adapter Broken Cable: stap 0, afbeelding 2 van 3 How to Repair an Apple AC Adapter Broken Cable: stap 0, afbeelding 3 van 3

  • Proceed to solder the black cable from the AC charger to the outer wire of your Macbook connector.

  • Isolate that wire. You don't need to cover up the whole extension of the outer wire, just enough so that it won't touch the white cable or the circuit board of the AC adapter.

  • You can use the black rubber tube or electrical tape. If you use the black tube try to keep it as far away as possible when soldering to prevent it from shrinking before you cover the wire.

繼續講黑色的電線焊接至對應的黑色電線上。

將電線絕緣。你不需要將整個編織的外露部份都覆蓋上絕緣套管，只要確保它不會接觸到白色電線或者AC適配器上的線路板。

你可以使用黑色橡膠管或者絕緣電膠布。如果你使用的是黑色的橡膠管，請確保焊接時盡可能的遠離焊接位置，避免覆蓋焊接位置前收縮。

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.