Ga door naar hoofdinhoud
Engels
Nederlands
Stap 29
Pull the speakers connector towards you and away from the I/O board, marked by a yellow square. Remove the 3 screws and lift as you see in the picture Move the board a little to the left while lifting to prevent damaging the two attached USB 3.0 ports.
  • Pull the speakers connector towards you and away from the I/O board, marked by a yellow square.

  • Remove the 3 screws and lift as you see in the picture

  • Move the board a little to the left while lifting to prevent damaging the two attached USB 3.0 ports.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.