Ga door naar hoofdinhoud

Sostituzione scheda pulsante di accensione Kobo Libra Colour

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden de handleiding die deze stap bevat.

Stap 1 vertalen

Stap 1
Kobo Libra Colour Power Button Board Replacement, Soften the power button board coating: stap 0, afbeelding 1 van 2 Kobo Libra Colour Power Button Board Replacement, Soften the power button board coating: stap 0, afbeelding 2 van 2
Soften the power button board coating
  • Heat an iOpener and lay it on the power button board at the top left corner for 90 seconds to soften the coating.

  • Alternatively, you can use a hair dryer or a heat gun for 30 seconds.

Scalda un iOpener e appoggialo sull'angolo in alto a sinistra della scheda del pulsante di accensione per 90 secondi per ammorbidire il rivestimento.

In alternativa, puoi usare un asciugacapelli o una pistola termica per 30 secondi.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.