Ga door naar hoofdinhoud

Kensington Slimblade Trackball Disassembly

Stap 4 vertalen

Stap 4
Démontage trackball Slimblade Kensington, Dépoussiérer le circuit.: stap 0, afbeelding 1 van 3 Démontage trackball Slimblade Kensington, Dépoussiérer le circuit.: stap 0, afbeelding 2 van 3 Démontage trackball Slimblade Kensington, Dépoussiérer le circuit.: stap 0, afbeelding 3 van 3
Dépoussiérer le circuit.
  • Dépoussiérer les contact en appuyant dessus avec la spatule et en soufflant dedans avec la soufflette à main. Recommencez dix à vingt fois pour chaque contact.

  • Desserrer le capteur de déplacement horizontal

  • Dépoussiérez le capteur si besoin. Celui-ci est étonnamment propre.

  • Faire de même avec le capteur de déplacement vertical.

Dust the button contacts by pressing on them with a spudger and blowing into them with a hand blower. Repeat ten to twenty times for each of the four contacts.

Remove the screws from the horizontal displacement sensor.

Dust the sensor as needed. (This one is surprisingly clean.)

Do the same for the vertical displacement sensor.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.