Logitech G903 Battery Replacement

Engels

Nederlands

Handleidingsbenodigdheden

Alle vooraf vereiste handleidingen moeten vertaald worden voordat deze vertaling volledig wordt beschouwd.

How to Power Off a Logitech G903

Logitech G903 Main Mouse Feet Replacement

How to Open the Logitech G903

Handleidingsinformatie

= Klaar = Onvolledig

Welk onderdeel ben je aan het vervangen?

Titel

Inleiding

Conclusie

If possible, turn on your device and test your repair before installing new adhesive and resealing.

Secure the new battery with pre-cut adhesive or double-sided adhesive tape. In order to position it correctly, apply the new adhesive into the device at the places where the old adhesive was located, not directly onto the battery. Press the new battery firmly into place.

Compare your new replacement part to the original part—you may need to transfer remaining components or remove adhesive backings from the new part before installing.

For optimal performance, ***calibrate your newly installed battery***: Charge it to 100% and keep charging it for at least 2 more hours. Then use your device until it shuts off due to low battery. Finally, charge it uninterrupted to 100%.

***To reassemble your device, follow the above steps in reverse order.***

Take your e-waste to an [[E-Waste|R2 or e-Stewards certified recycler|new_window=true]].

Repair didn’t go as planned? Check out our [link|https://www.ifixit.com/Answers/?search=Logitech%20G903|Answers community] for troubleshooting help.