Ga door naar hoofdinhoud

iMac M1 24寸 拆解

Stap 6
iMac M1 24" Teardown: stap 0, afbeelding 1 van 3 iMac M1 24" Teardown: stap 0, afbeelding 2 van 3 iMac M1 24" Teardown: stap 0, afbeelding 3 van 3
  • Our 2.5 mm nut driver makes a rare appearance (you may remember its role in the Demontage van de iPhone 6s)—removing logic board standoff screws. Thanks to our iPhone Marlin kit, we're covered!

  • Good to see incredibly-thin computers opting for screws over glues. Hey, iPad team, take note?

  • The fanless M1 MacBook Air-sized logic board is housed in the artificial "chin" of the iMac.

  • Unlike the one in the MacBook Air, this M1 is actively cooled by a pair of fans. Each fan blows inward across the logic board, where the heatsink draws heat away from the M1 with a copper heat pipe and two short heatsinks.

  • We'll circle back later for a closer look at those fans, but we can't resist a bare logic board!

我们2.5毫米螺丝刀的出场机会不多(你可能还记得它在iPhone 6s拆机中的角色)——拆掉主板的支架螺丝。

很高兴看到在这么薄的电脑中用螺丝取代了胶水。iPad团队,注意到了吗?

无风扇M1 MacBook Air主板大小相当的主板被安装在“假下巴”的下面。

不像 MacBook Air,这个M1芯片由一对风扇提供主动散热。每一个风扇都向内吹穿过主板,通过一根铜管和两个散热鳍片将M1芯片的热量带出电脑。

我们稍后会回过头来仔细看看那些风扇,等不及要来看看主板了!

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.