Ga door naar hoofdinhoud

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 42 handleidingen die deze stap bevatten.

Stap 20
Slide the lower left pick to the lower left corner to cut the adhesive on that corner. Leave the pick at the corner. Do not pry any farther, and do not remove the pick from the iPad. There are quite a few things to avoid beneath the lower bezel, so study the third image closely:
  • Slide the lower left pick to the lower left corner to cut the adhesive on that corner.

  • Leave the pick at the corner. Do not pry any farther, and do not remove the pick from the iPad.

  • There are quite a few things to avoid beneath the lower bezel, so study the third image closely:

  • Antennas

  • Home button cavity

  • Digitizer cable

  • The following steps will direct you where to pry to avoid damage to these components. Only apply heat and pry where directed.

滑动左下边的撬片来分离粘合剂。

滑动到左下角时停止滑动。 然后放置在此

这里有几个地方需要避免撬动到。 详见第三张图片。

天线

Home键

数字化线缆

接下来的步骤将会指导您如何避免伤害这些部件。 只加热和撬动指南所指示的部位。

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.