Ga door naar hoofdinhoud

iMac Pro拆解

Stap 6
iMac Pro Teardown: stap 0, afbeelding 1 van 3 iMac Pro Teardown: stap 0, afbeelding 2 van 3 iMac Pro Teardown: stap 0, afbeelding 3 van 3
  • AirPort card functions are consolidated onto the main board—for some unknown reason, Apple ditched the modularity from the 5K model. But we did pick up this funky new retaining clip for the coax cables.

  • The power supply connects to the logic board by way of not one, not two, but four shiny terminals secured with Torx screws.

  • This design is much closer to what we saw on the 2013 Mac Pro than the plasticky connectors we're used to ripping out of the iMac 5K.

  • It also makes accessing logic board components (apart from the RAM of course) much, much easier. With the power supply tucked back into the rear shell, we can remove the board right away. Let's do that!

AirPort模块被整合在了主板上——出于某些未知原因,苹果从5K版本开始取消了AirPort的模块化设计。而如今我们能遇见这个用于电缆连接的新夹片

电源通过四条电缆连接至主板,并由星型螺丝固定

这个设计更接近于我们在2013版Mac Pro中见到的,而不是iMac 5K中的设计

这也让拆解主板更加简单了(除了内存)。当电源连接断开,我们便可将主板拿出。

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.