Ga door naar hoofdinhoud

iRobot Roomba 880 Cleaning Head Replacement

Stap 1 vertalen

Engels
Nederlands
Stap 1
iRobot Roomba 880 Cleaning Head Replacement: stap 0, afbeelding 1 van 3 iRobot Roomba 880 Cleaning Head Replacement: stap 0, afbeelding 2 van 3 iRobot Roomba 880 Cleaning Head Replacement: stap 0, afbeelding 3 van 3
  • Flip the Roomba over, wheel-side up.

  • Using a Phillips #1 screwdriver, loosen the four 15 mm screws illustrated. Two are located on the battery door, while two are on the bottom panel.

  • Remove the battery door, pulling straight up from the two indents above the screws.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.