Repareer je spullen Gemeenschap Winkel

iRobot Roomba 880 Cleaning Head Replacement

Inleiding

This guide will show you how to replace the whole Cleaning Head in the Roomba 880, which houses the Debris Extractors. Let's do it!

Wat je nodig hebt

  1. iRobot Roomba 880 Cleaning Head Replacement, Cleaning Head: stap 1, afbeelding 1 van 3 iRobot Roomba 880 Cleaning Head Replacement, Cleaning Head: stap 1, afbeelding 2 van 3 iRobot Roomba 880 Cleaning Head Replacement, Cleaning Head: stap 1, afbeelding 3 van 3

    • Flip the Roomba over, wheel-side up.

    • Using a Phillips #1 screwdriver, loosen the four 15 mm screws illustrated. Two are located on the battery door, while two are on the bottom panel.

    • Remove the battery door, pulling straight up from the two indents above the screws.

    Vertaal

  2. iRobot Roomba 880 Cleaning Head Replacement, Side Brush: stap 2, afbeelding 1 van 2 iRobot Roomba 880 Cleaning Head Replacement, Side Brush: stap 2, afbeelding 2 van 2

    • Using a flat head screwdriver, loosen the screw on the top of the side brush.

    • Remove side brush.

    • The bottom panel cannot be removed without first removing the side brush, so make sure to do this first.

    Vertaal

  4. iRobot Roomba 880 Cleaning Head Replacement, Bottom Panel: stap 3, afbeelding 1 van 1

    • Pull up on the bottom panel to remove.

    Vertaal

  5. iRobot Roomba 880 Cleaning Head Replacement, Dust Bin: stap 4, afbeelding 1 van 2 iRobot Roomba 880 Cleaning Head Replacement, Dust Bin: stap 4, afbeelding 2 van 2

    • Reach underneath the dust bin, press the bin removal button, and pull out.

    • The bin removal button is located on the top edge of the bin.

    Vertaal

  6. iRobot Roomba 880 Cleaning Head Replacement: stap 5, afbeelding 1 van 2 iRobot Roomba 880 Cleaning Head Replacement: stap 5, afbeelding 2 van 2

    • Using a Phillips #1 screwdriver, remove the four 10 mm screws shown.

    Vertaal

  7. iRobot Roomba 880 Cleaning Head Replacement, Remove Cleaning Head: stap 6, afbeelding 1 van 3 iRobot Roomba 880 Cleaning Head Replacement, Remove Cleaning Head: stap 6, afbeelding 2 van 3 iRobot Roomba 880 Cleaning Head Replacement, Remove Cleaning Head: stap 6, afbeelding 3 van 3

    • Remove the cleaning head by grabbing the two protruding tabs as shown, and pulling straight up.

    Vertaal
Conclusie

To reassemble your device, follow these instructions in reverse order.

Één andere persoon heeft deze handleiding voltooid.

Auteur

met 3 andere bijdragers

Allie Ahern

Lid sinds: 04/27/17

130 Reputatie

1 Handleiding geschreven

Medailles: 4

+1 extra badge

Team

Cal Poly, Team S17-G4, Banghart Spring 2017 Lid van Cal Poly, Team S17-G4, Banghart Spring 2017

CPSU-BANGHART-S17S17G4

5 Leden

5 handleidingen geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 2

Afgelopen 7 dagen: 6

Afgelopen 30 dagen: 17

Altijd: 2,242