Lenovo ThinkPad T400 Motherboard Replacement

Vorige stap Volgende stap

Stap 2 vertalen

Terug naar de handleiding

Engels

Nederlands

Stap 2

Lenovo ThinkPad T400 Motherboard Replacement, Removing the 2.5" and Ultrabay drives: stap 0, afbeelding 1 van 2

Lenovo ThinkPad T400 Motherboard Replacement, Removing the 2.5" and Ultrabay drives: stap 0, afbeelding 2 van 2

Removing the 2.5" and Ultrabay drives

Unscrew the 2 small Phillips screws that hold the 2.5" bay cover and the Ultrabay slider in place.
The 2.5" bay cover should now come loose, so pull it out. Under the ultrabay drive, you will find a small slider. Slide it in the direction shown in yellow and a tab should pop out.
Pull both the 2.5" and the Ultrabay drives by their respective tabs, shown in green.
The Ultrabay tab can easily snap off if left pulled out, so push it back in after you remove the drive.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.