Ga door naar hoofdinhoud
Help
Bewerken van stap 12 —

Waarschuwing: Je bewerkt nu een vooraf vereiste handleiding van de handleiding die je net bekeek. Alle wijzigingen die je hierin maakt, beïnvloeden alle 2 handleidingen die deze stap bevatten.

Stap type:

Sleep om te herschikken

At an angle, carefully insert a putty knife about 1/8 inch into the seam between the two opening tools.

Again, there are thin metal rails running along the inside of the rear panel, so take great care when inserting the putty knife.

Once the putty knife has cleared the lip of the rear panel, angle the putty knife so that it is vertical, and carefully (but firmly) wiggle it straight down into the iPod via the gap between the plastic opening tools.

Push with your fingers on the rear panel behind the putty knife to minimize bending. Ever so slightly flex the putty knife to ensure that most of the metal tabs on this side of the iPod are disengaged.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.