Ga door naar hoofdinhoud
Help
Bewerken van stap 1 —

Stap type:

Sleep om te herschikken

Use the tip of a spudger to flip up the display data cable lock and rotate it toward the MagSafe 2 power port side of the computer.

Pull the display data cable straight out of its socket on the logic board.

Do not lift up on the display data cable, as its socket is very fragile. Pull the cable parallel to the face of the logic board.

Do not touch the contacts on the data connector or its socket with your fingers or any tools, as you may deposit oils or damage the pins.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.