Ga door naar hoofdinhoud

Retina MacBook 2015 Opening Lower Case Assembly

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 12 handleidingen die deze stap bevatten.

Engels
Nederlands

Stap 1 vertalen

Stap 1
Retina MacBook 2015 Opening Lower Case Assembly, Unfasten the lower case: stap 0, afbeelding 1 van 1
Unfasten the lower case
  • Before proceeding, unplug and power down your MacBook. Close the display and flip it upside-down.

  • Remove the following eight screws securing the lower case:

  • Two 1.8 mm P5 Pentalobe screws

  • Four 2.9 mm P5 Pentalobe screws

  • Two 6.1 mm P5 Pentalobe screws

  • Note the orientation of the screws as you remove them—they need to be reinstalled at a slight angle.

  • Throughout this repair, keep track of each screw and make sure it goes back exactly where it came from to avoid damaging your device.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.