Logitech G500 Cord Replacement

Vorige stap Volgende stap

Stap 12 vertalen

Terug naar de handleiding

Engels

Nederlands

Stap 12

Logitech G500 Cord Replacement: stap 0, afbeelding 1 van 3

Logitech G500 Cord Replacement: stap 0, afbeelding 2 van 3

Logitech G500 Cord Replacement: stap 0, afbeelding 3 van 3

Pull the circuit boards loose from the bottom plate.
You may need to use a spudger to pry the circuit free.
The mouse cable is glued to the bottom plate, so do not quickly yank the circuit boards away.
The circuit boards are not very strongly attached to each other; do not pull hard on the top board or they may separate, damaging the device.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.