Ga door naar hoofdinhoud

Mini digitale oscilloscoop DHZ soldeerkit

Engels
Nederlands
Stap 62
Mini Digital Oscilloscope DIY Soldering Kit Assembly, Install the knob cover: stap 0, afbeelding 1 van 3 Mini Digital Oscilloscope DIY Soldering Kit Assembly, Install the knob cover: stap 0, afbeelding 2 van 3 Mini Digital Oscilloscope DIY Soldering Kit Assembly, Install the knob cover: stap 0, afbeelding 3 van 3
Install the knob cover
  • Align the hole in the bottom of the knob cover with the encoder knob.

  • Insert the knob cover onto the encoder knob and push it down until it bottoms out.

Lijn het gat in de onderkant van het knopdeksel uit met de encoderknop.

Plaats de knopafdekking op de encoderknop en druk deze naar beneden totdat deze niet verder kan.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.