Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden de handleiding die deze stap bevat.
Stap 2 vertalen
Stap 2
Disconnect the interconnect cable
-
Use a clean fingernail or the flat end of a spudger to flip up the locking flap on the interconnect cable ZIF connector, located on the I/O board.
-
Use tweezers or your fingers to grip the cable's plastic pull tab and gently pull the cable out of its socket.
Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.