Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 2 handleidingen die deze stap bevatten.
Stap 12 vertalen
Stap 12
Remove the screen assembly
-
Lift the screen assembly straight up and remove it from the laptop.
-
Make sure the screen hinges are open 180 degrees and guide them into their recesses in the frame.
-
Install and partially tighten the four hinge screws.
-
Close your laptop and make sure the screen is properly aligned. If it clicks or snaps, readjust the alignment.
-
Fully tighten the hinge screws.
Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.