Ga door naar hoofdinhoud

AT-LP60X Setup Guide

Engels
Nederlands
Stap 5
AT-LP60X Setup Guide, Reconnect Turntable: stap 0, afbeelding 1 van 1
Reconnect Turntable
  • Reconnect the power supply.

  • Connect the 3.5mm to RCA to your speakers.

  • For powered speakers the output switch should be in "LINE", if connecting to an amp/phono input the output should be in "PHONO"

  • The output switch position does not matter if you are connecting to a Bluetooth speaker.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.