Stap 2 vertalen
Stap 2
Disconnecting Cables Part 1
-
Take the prying tool and carefully lift the metal clip on the flat connector above the right hinge.
-
Now pull it out towards you
-
Finally disconnect all antenna cables found (2 or 4, depending on your specs)
-
Disconnect them by either prying them off with the plastic tool or pulling upwards carefully from the cable itself.
-
Now carefully pull them out of the slit with a tweezer (the prying tool is too sharp and could damage the cable coating).
Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.