Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden de handleiding die deze stap bevat.
Stap 5 vertalen
Stap 5
-
Unscrew the three 3.5 mm screws that secure the circuit board using a Phillips #00 screwdriver.
-
Remove the circuit board by lifting upward.
-
To fully remove the USB ports from the circuit board, you'll need to desolder the points. Use the How to Solder and Desolder Connections guide for more information on soldering and desoldering connections.
Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.