Stap 2 vertalen
Stap 2
Expose and loosen the screws
-
Locate the two small oval depressions in the keyboard fascia, just below either Ctrl key.
-
Using a flat screwdriver or narrow spudger in the depressions, slide the fascia up towards the hinges about 3mm (0.1 inches). The top edge slips beneath the bezel.
-
This exposes six Phillips screw heads, located in the 3rd and 5th rows of the key area. Loosen them.
Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.