Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Onderdelen & Gereedschap

Help

Deze versie is geschreven door: oldturkey03 (stem details) ,

Titel:

logic Board with Battery issue?

Tekst:

Hi all,

So i took on a ipod touch 2g project to see if I could fix it.

Ipod touch 2g didn't turn on.. completely dead! I took it apart measured the battery it measured 3.7 volts charged. Worked on ipod touch the same day, I removed logic board and cleaned with brush and some isoprophyl alcohol (issue was water corrosion around some chips on the back of the board opposite side of the ear phone jack.) Let board dry for about 3 hours and put back together, touch still does not turn on. I take apart again and measure battery. Battery measure .47v. I Let IT charge over night and max battery charge is now .70v. Could I have broke the battery by taking it apart? I mean i really didn't do much to the battery but take it off of the metal plate, it bent it a bit... Now I am wondering if its worth to buy a new battery or the logic board is shorting the batter now?

Also will a ipod touch 2g turn on without a digitizer?

(I have tried with and without it.)

Thanks guys!

Apparaat:

iPod Touch 2nd Generation

Status:

open

Goedgekeurd antwoord:

58283

Origineel bericht door: Dallas Malone ,

Titel:

logic Board with Battery issue?

Tekst:

Hi all,

So i took on a ipod touch 2g project to see if I could fix it.

Ipod touch 2g didn't turn on.. completely dead! I took it apart measured the battery it measured 3.7 volts charged. Worked on ipod touch the same day, I removed logic board and cleaned with brush and some isoprophyl alcohol (issue was water corrosion around some chips on the back of the board opposite side of the ear phone jack.) Let board dry for about 3 hours and put back together, touch still does not turn on. I take apart again and measure battery. Battery measure .47v. I Let IT charge over night and max battery charge is now .70v. Could I have broke the battery by taking it apart? I mean i really didn't do much to the battery but take it off of the metal plate, it bent it a bit... Now I am wondering if its worth to buy a new battery or the logic board is shorting the batter now?

Also will a ipod touch 2g turn on without a digitizer?

(I have tried with and without it.)

Thanks guys!

Apparaat:

iPod Touch 2nd Generation

Status:

open