had glass and lcd repair, started to have ghost touching
repaired an ipad mini 2, had ghost touching for abit, now the ipad wont allow me to do anything, lcd works fine.
tried kapton tape on now as i hadnt put any on at first.
whats the issue?
Iedereen met meer dan 20 reputatie kan problematische opmerkingen en berichten markeren.
ACCEPTEREN ALS OPLOSSING
Bericht: Antwoord op "had glass and lcd repair, started to have...
Laatste stem:
Kiezers:
mayer
(Door beheerder besloten)
Vraag
Antwoord
On the iPad mini, ghost touching is usually related to the copper border surrounding the digitizer. this can be found on the LCD facing side of the digi. It's particularly important to cover the bottom sets of traces with Kapton tape. Higher quality replacement digi's usually have this tape already in place.
Jessa has a greta write-up here.
Now if all of this was done and you still have ghost touching, then you need to consider that perhaps the replacement digitizer you have is defective.