Ga door naar hoofdinhoud
Help

Moderatie

Stemmen deze maand:

Sneltoetsen

Iedereen met meer dan 20 reputatie kan problematische opmerkingen en berichten markeren.

ACCEPTEREN ALS OPLOSSING

Bericht: Antwoord op "How to reset "Maintenance required" light?"
Laatste stem:

Verberg details

Vraag

How to reset "Maintenance required" light?

Hi,

How do I reset the "Maintenance required" light after an oil change on my 2007 Toyota Corolla?

TechGuy123


Antwoord

Undo your battery for a couple of minutes. This worked on the older models. I believe this is the procedure for yours.

Turn the ignition key to 'ON' and press the odometer button until the display reads ODO (not Trip A or B).

Turn the ignition key to OFF.

Hold in the same button you used in step 1.

While holding the button in, turn the ignition key to ON.

The ODOMETER will change to:

5 dashes - - - - -

Then 4 dashes - - - -

Then 3 dashes - - -

Then 2 dashes - -

Then 1 dash -

THEN all zeros 0 0 0 0 0

Then back to the correct mileage.

Then the Maintenance Required light should blink and go out.

2007

http://www.ehow.com/how_6400319_reset-co...

http://wiki.answers.com/Q/How_do_you_res...

2005

http://wiki.answers.com/Q/How_do_you_res...