Ga door naar hoofdinhoud
Help

Moderatie

Stemmen deze maand:

Sneltoetsen

Iedereen met meer dan 20 reputatie kan problematische opmerkingen en berichten markeren.

ACCEPTEREN ALS OPLOSSING

Bericht: Antwoord op "I think my power port needs to be replaced"
Laatste stem:
Kiezers: oldturkey03 (Door beheerder besloten)

Verberg details

Vraag

I think my power port needs to be replaced

Hi, I am unable to charge my Kindle paperwhite because the charger will not sit in the power port. I think the connection in the port inside the kindle is broken. How do i repair or get it repaired?

Thx


Antwoord

Hi brian,

Here is a link to the ifixit guide to repair the motherboard for the Kindle paperwhite. It is handy because it shows how to access the motherboard so that the USB port can be reached. It is visible in the image in Step.6 (the silver connector at the bottom of the board)

Kindle Paperwhite 1st Generation Motherboard Replacement

The USB is an SMD (surface Mounted Device) type USB connector. You will need the requisite tools and knowledge to remove/replace (or just re-solder) the connector.

Any reputable, professional mobile phone repair service should be able to do this for you. They should also give a guarantee for their work and of course are responsible for any damage incurred. Unless you take just the board and the part to them to get them to replace it. Just a thought. This may reduce the price of the repair

Here is a link to the replacement part for the Kindle. It is not a recommendation to use the seller. It is shown to give an idea of the price.

http://www.ebay.com.au/itm/Micro-USB-DC-...