Ga door naar hoofdinhoud

MacBook Pro 15" (2012年中)Retina 显示器组件更换

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 3 handleidingen die deze stap bevatten.

Stap 5
MacBook Pro 15" Retina Display Mid 2012 Display Assembly Replacement: stap 0, afbeelding 1 van 1
  • Open the MacBook Pro approximately 110 degrees, and place it sideways on the table, as shown.

  • While holding the display and upper case together with your left hand, remove the remaining T8 Torx screw from the lower (closer to the table) display bracket.

将 MacBook Pro 打开约 110 度,并将其侧放在桌子上,如图所示。

用左手将显示屏和上壳固定在一起,然后从下部(靠近桌子的一侧)显示屏支架上卸下剩余的 T8 Torx 螺钉。

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.