Ga door naar hoofdinhoud
Engels
Nederlands
Stap 17
Insert the flat end of a spudger into the gap between the SATA data connector and the hard drive. Twist the spudger to separate the SATA data connector from the hard drive, then disconnect it from the hard drive.
  • Insert the flat end of a spudger into the gap between the SATA data connector and the hard drive.

  • Twist the spudger to separate the SATA data connector from the hard drive, then disconnect it from the hard drive.

  • Repeat this process for the SATA power connector.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.