Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Stap 3
There are six screws that secure the printer mechanism. Remove the first three 10 mm screws that hold the printer mechanism in place using a Phillips #2 screwdriver. Remove the first three 10 mm screws that hold the printer mechanism in place using a Phillips #2 screwdriver.
  • There are six screws that secure the printer mechanism.

  • Remove the first three 10 mm screws that hold the printer mechanism in place using a Phillips #2 screwdriver.

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.