Ga door naar hoofdinhoud

Sostituzione case superiore PowerBook G4 Aluminum 15" 1.67 GHz

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 26 handleidingen die deze stap bevatten.

Stap 6
PowerBook G4 Aluminum 15" 1.67 GHz Upper Case Replacement: stap 0, afbeelding 1 van 1
  • Turn the computer over and open the display.

  • Remove the two 4.2 mm long, 1.5 mm hex screws at the top corners of the upper case (two total).

  • A T6 Torx driver will work, but repeated use will strip the screws.

Ribalta il computer ed apri il display.

Rimuovi le due viti lunghe 4,2 mm, le viti esagonali di 1,5 mm agli angoli superiori del case superiore (due in totale).

Un cacciavite T6 Torx funzionerà, ma l'uso prolungato spanerà le viti.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.