With a very small bladed screw driver you need pry the top off from inside that bezel,  there are some 15-20 post that keep it in place and what you have to release (not a big deal).

Taking it slow and deliberate you won't leave a mark (best to mark it's position to put back together correctly (I forgot, yet a 50/50 chance)).

Once the top is off find the battery (duh) and the wires that come from it, disconnecting it from it's female terminal on the mother board.

Watch a movie on the TV with no power being supplied to the switch, just let it alone for awhile (the longer the better).

You need for it to completely discharge -it's the capacitors that will hold the charge and time given
for them to discharge.

The power supply has no ground wire so plugging it in will just supply power.

When enough time has past - plug in the battery, and snap the top back into place.

Mine booted right up like nothing had happened.

Conclusie

Titel

Inleiding

Kop 2
Bold
Italic
List
Numbered list
Link
Video

Conclusie

Kop 2
Bold
Italic
List
Numbered list
Link
Video

Stappen

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.