Ga door naar hoofdinhoud
Engels
Nederlands

Stap 3 vertalen

Stap 3
Use Multimeter to test the voltage of the battery. Put the black lead into ground slot of multimeter and the red lead into the V(ohm)mA slot.
  • Use Multimeter to test the voltage of the battery.

  • Put the black lead into ground slot of multimeter and the red lead into the V(ohm)mA slot.

  • Place the red and black leads to the two outside metal plate, each on opposite sides, on the battery as shown.

  • Check that the voltage displayed on the multimeter matches closely to the voltage defined on the battery. Normally 3.7 V.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.