Onderdelen

Geen onderdelen nodig.

Remove back cover by applying pressure and sliding up towards the top of the phone. Remove back cover by applying pressure and sliding up towards the top of the phone. Remove back cover by applying pressure and sliding up towards the top of the phone.
  • Remove back cover by applying pressure and sliding up towards the top of the phone.

Voeg opmerking toe

Remove the battery by lifting from slot on the right hand side. Remove the battery by lifting from slot on the right hand side.
  • Remove the battery by lifting from slot on the right hand side.

Voeg opmerking toe

Use Multimeter to test the voltage of the battery. Put the black lead into ground slot of multimeter and the red lead into the V(ohm)mA slot.
  • Use Multimeter to test the voltage of the battery.

  • Put the black lead into ground slot of multimeter and the red lead into the V(ohm)mA slot.

  • Place the red and black leads to the two outside metal plate, each on opposite sides, on the battery as shown.

  • Check that the voltage displayed on the multimeter matches closely to the voltage defined on the battery. Normally 3.7 V.

Have in mind that a 100% charged Li-ion battery can measure up to ~4.2 V

Niky Nikolov - Antwoord

Conclusie

To reassemble your device, follow these instructions in reverse order.

Één andere persoon heeft deze handleiding voltooid.

Melinda Phan

Lid sinds: 17-04-11

435 reputatie

9 handleidingen geschreven

Team

Cal Poly, Team 9-64, Walters Spring 2011 Lid van Cal Poly, Team 9-64, Walters Spring 2011

CPSU-WALTERS-S11S9G64

5 Leden

9 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 3

Afgelopen 7 Dagen: 31

Afgelopen 30 Dagen: 124

Altijd: 3,266